Contatti Zyxel

WAC6303D-S Dual Radio Wave2

Wireless Access Point Dual Radio Wave2 3x3 802.11a/b/g/n/ac 1600Mbps, Antenne Smart integrate, 2 Porte LAN Gigabit, supporto PoE (17W), no PSU

  • Excellent wireless coverage and performance with the latest 3x3 Wave 2 802.11ac technology
  • Smart antenna technology and next generation beamforming deliver maximum coverage
  • Innovative MU-MIMO technology increases downstream throughput by simultaneously talking to multiple devices at the same time
  • Simple installation with APFlexTM or Zyxel Utility makes installation and setup a breeze whether for just single or multiple units at once
  • Solid state capacitors and advanced heat dissipation ensure high reliability and long life—even in the toughest environments
  • Advanced Cellular Coexistence minimizes interference from 3G/4G cellular networks

Networking administrators managing busy venues must understand how visitors longed for WiFi and how challenging it is to meet the demands within limited budgets.

Zyxel brings affordable and triple-performance 3x3:3 MU-MIMO access point WAC6303D-S which is built with Smart antenna to mitigate co-channel interference in high-density environment. And its embedded BLE Beacon provides insight into your consumers, WAC6303D-S not only resolves the challenge today it thinks for the ever-growing mobility demands tomorrow.

MU-MIMO, New Definition of Wi-Fi

Stepping up from 802.11ac, the second generation Wave 2 technology introduces Multi-User MIMO (MU-MIMO). This is an important WiFi development that enables an AP to communicate with multiple clients at a time offering 300% performance for a 3x3 AP.

Zyxel Other vendor

Optimal Wireless Experience

WAC6303D-S features Smart antenna technology which is proven able to mitigate co-channel interference, and adaptively adjust antenna patterns to fit in high-density application.


Built for Superior performance

The WAC6303D-S is built with a high-efficiency antenna module, premium power amplifiers and low-noise elements delivering superior wireless performance over other Wave 2 access points on the market.


Optimized wireless experience with advanced features

To provide outstanding performance in crowded environment, WAC6303D-S features 3G/4G interference immunity, excellent receive sensitivity and DCS, which enlarge its service coverage for more clients and better quality of connection.

Unified access point- Fits all businesses

Stay standalone mode if you’re a start-up, needing just few APs; convert to controller-managed mode when business grows up, requiring hundreds of APs.

Standalone when you start Controller managed as you grow



802.11ac Wave 2 Dual-Radio Unified Pro Access Point

RF Specifications
802.11n/ac premium features
  • 2.4GHz: 2x2 MIMO with two spatial stream (SU-MIMO)
  • 5GHz: 3x3 MIMO with three spatial stream (SU-, or MU-MIMO)
  • 802.11ac beamforming (transmit beamforming)
  • Maximal ratio combining (MRC)
  • Low End Sensitivity Improvements (LESI)
  • Time Domain Channel Smoothing
  • 20-, 40- and 80-MHz channels
  • PHY data rates total up to 300 Mbps (11n) + 1300 Mbps (11ac)
  • Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
  • Cyclic Delay diversity (CSD) support
  • Maximum Likelihood Demodulation (MLD) support
  • Low Density Parity Check (LDPC) support
Typical transmit output power (dBm) *1
  • US (FCC) 2.4 GHz: 25 dBm
  • US (FCC) 5 G GHz: 28 dBm
  • EU (ETSI) 2.4 GHz: 20 dBm
  • EU (ETSI) 5 G GHz: 26 dBm
Antenna gain
  • 2.4 GHz: 3 dBi; 2x2 MIMO
  • 5 GHz: 4 dBi 3x3 MIMO
Support data rate
  • 802.11a/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
  • 802.11n: up to 300 Mbps in MCS15 (40MHz; 2 Spatial Streams; GI=400ns)
  • 802.11ac:up to 1300 Mbps in MCS9 (80MHz; 3 Spatial Streams; GI=400ns)
Receive sensitivity Min. Rx sensitivity up to -103 dBm
Number of 10/100/1000M LAN 2 x switch ports
Console port 4-Pin serial
Input power requirements Direct DC power or Power over Ethernet (PoE)*2
PoE 802.3at (full mode)
802.3af (Restrict 2.4G & 5G radio to one transmit stream only.)
PoE power draw 16.2W (802.3at PoE)
WLAN maximum throughput Up to 1600 Mbps
Fast roaming Pre-authentication and PMK caching
Wireless Security
  • WPA/WPA2-Enterprise
  • WLAN access control list
  • EAP type
  • IEEE 802.1X
  • MAC filtering
  • Web authentication *3
  • Layer-2 isolation
  • RADIUS authentication
  • Microsoft AD authentication*3
  • LDAP authentication *3
  • MAC authentication *3
  • Rogue AP detection
Number of SSID 16
  • WMM
  • WMM power save
  • U-APSD
  • DiffServ marking
IPv6 support Yes
DHCP client Yes
ZON Utility*4
  • Discovery of Zyxel switches, APs and gateways
  • Centralized and batch configurations
    • IP configuration
    • IP renew
    • Device factory reset
    • Device reboot
    • Device locating
    • Web GUI access
    • Firmware upgrade
    • Password configuration
    • One-click quick association with Zyxel AP Configurator (ZAC)
Smart Connect
  • Neighbor device discovery
  • One-click remote management access to the neighboring Zyxel devices
Zyxel AP Configurator*5
  • Batch AP configuration
  • Batch AP firmware upgrade
  • Batch AP profile backup
Zyxel Wireless Optimizer *6
  • Wi-Fi AP planning
  • Wi-Fi coverage detection
  • Wireless health management
Standalone AP mode Yes
Managed AP mode Yes
SNMP v2c/v3
Standard Compliance
  • IEEE 802.3
  • IEEE 802.3u
  • IEEE 802.11ab
  • IEEE 802.3au
  • IEEE 802.3az
  • IEEE 802.3af/at
PoE IEEE 802.3af/at
  • 802.11b: DBPSK, DQPSK, CCK
  • 802.11g: BPSK, QPSK, 16-QAM, 64-QAM
  • 802.11a: BPSK, QPSK, 16-QAM, 64-QAM
  • 802.11n: BPSK, QPSK, 16-QAM, 64-QAM
  • 802.11ac: BPSK, QPSK, 64-QAM, 256-QAM
  • FCC Part 15C
  • FCC Part 15E
  • ETSI EN 300 328
  • EN 301 893
  • LP0002
  • EN 60601-1-2
  • FCC Part 15B
  • EN 301 489-1
  • EN 301 489-17
  • EN55032
  • EN55024
  • EN61000-3-2/-3
  • BSMI CNS13438
  • EN 60950-1
  • IEC 60950-1
  • BSMI CNS14336-1
Physical Specifications and others
Item Dimensions (WxDxH)(mm/in.)
211 x 223 x 39 / 8.31 x 8.78 x 1.54
Weight (kg/lb.)
Packing Dimensions (WxDxH)(mm/in.)
251 x 247 x 55 / 9.88 x 9.72 x 2.17 
Weight (kg/lb.)
1040/ 2.29
Included accessories Wall/ceiling mount plate
Plenum rating Yes
Kensington lock support Yes
Power supply Input: AC 100-240V, 50~60Hz
Output: DC +12V 2A (Sold separately)
MTBF (hr) 3,960,217
Environmental Specifications
Operating Temperature
-20°C to 60°C / -4°F to 140°F
10% to 90% (Non-condensing)
Storage Temperature
-40°C to 70°C / -40°F to 158°F
10% to 90%

*1. Maximum output power is limited by regional regulatory.
*2. When both power sources are available, DC power takes priority over PoE.
*3. Supports when working with Zyxel NXC controller.
*4. Support from ZON Utility V2.1 or above.
*5. Support from ZAC V1.1.4 or above.
*6. Support from ZWO V1.0.5 or above