Contatti Zyxel

AP Nebula Flex NWA1123-ACv2

Wireless Access Point Dual Radio, Standalone, Cloud Managed.

  • NebulaFlex gives you the flexibility to switch between standalone and our License Free Nebula cloud management
  • Nebula cloud management allows easy deployment, real-time configurations and access to all your access points anytime with
  • 802.11ac 2x2 — supporting combined data rate of up to 1.2 Gbps
  • Compact ceiling-mount design with optimized RF performance
  • Robust build quality including solid-state capacitors to ensure long life and operational reliability

Wherever you are, WiFi follows

NWA1123-ACv2 compact design and reliable performance

The Zyxel NWA1123-ACv2 802.11ac Hybrid access point supports a combined data rate of up to 1.2Gbps. With Zyxel’s innovative design and commitment to “RF First” for high performance and reliable connections through design, the NWA1123-ACv2 delivers increased coverage and improved connection speeds for every client.

The NWA1123-ACv2 supports NebulaFlex, giving you the ability to easily switch between standalone and our license free Nebula cloud management, anytime, with a few simple clicks.

Manage it your way! 
Switch easily between standalone and cloud management

Best interior WiFi performance in style

Struggling between performance and environment cohesion when deploying business wireless APs is in past. The stylish exterior of NWA1123-ACv2 is suitable for any interior that not only outperforms but also blends into the interior better as well prevents equipment theft.


Optimize for what you need

To create a thoroughly enhanced WiFi experience, NWA1123-ACv2 made a big move on optimized antennas and RF design via fine-tune software and innovative hardware. Featuring with DCS and load-balance, NWA1123-ACv2 delivers smooth and superior WiFi experience in workplaces.


Built for Superior performance

The NWA1123-ACv2 is built with an advanced antenna module, premium power amplifiers and low-noise elements to deliver superior wireless performance.


Setup and forget

The refreshed NWA1123-ACv2 features streamline controller-less deployment. Out of the box and finish three steps configuration with ZON then NWA1123-ACv2 capable of operating autonomously without extra computer or special management tool as well as allowing administrator easy monitor via any SNMP tool in hand, even not a networking expert can handle it easily.


Blending multi-operation flexibility with practical business features

NWA1123-ACv2 provides repeater/root-AP mode compatibility with Zyxel Unified Pro and Unified APs, that users can extend wireless connectivity via enterprise grade WDS to difficult cabling locations without the bother of troublesome cabling. Also, as an ideal solution, NWA1123-ACv2 offers an array of practical features like multiple SSID and solid WiFi security.




802.11ac Dual-Radio Ceiling Mount PoE Access Point

Main Design
Wireless frequency 2.4 GHz & 5 GHz
Radio 2
RF Specifications
Frequency band 2.4 GHz
  • 2.4 GHz (IEEE802.11 b/g/n)
  • USA (FCC): 2.412 to 2.462 GHz
  • Europe (ETSI): 2.412 to 2.472 GHz

5 GHz
  • 5 GHz (IEEE 802.11 a/n/ac)
  • USA (FCC): 5.15 to 5.35 GHz; 5.725 to 5.850 GHz
  • Europe (ETSI): 5.15 to 5.35 GHz; 5.470 to 5.725 GHz
802.11 premium features
  • 2x2 multiple-input multiple-output (MIMO) with two spatial streams
  • Maximal ratio combining (MRC)
  • 20-, 40- and 80-MHz channels
  • PHY data rates total up to 300 Mbps (11n) + 866 Mbps (11ac)
  • Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
  • Cyclic Delay diversity (CSD) support
  • Maximum Likelihood Demodulation (MLD) support
  • Low Density Parity Check (LDPC) support
Typical transmit output power (dBm) *1 US (FCC) 2.4 GHz : 23 
US (FCC) 5 GHz : 26 
EU (ETSI) 2.4 GHz : 20 
EU (ETSI) 5 GHz : 26
Number of antenna 2T2R MIMO
Antenna gain 2.4 GHz : 3 dBi 
5 GHz : 4 dBi
Support data rate
  • 802.11a/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
  • 802.11n: up to 300 Mbps in MCS15 (40MHz; GI=400ns)
  • 802.11ac:up to 866 Mbps in MCS9 (80MHz; 2 spatial Streams; GI=400ns)
Receive sensitivity 2.4 GHz :
  • 802.11b/g, min. up to -99 dBm
  • 802.11n/20 MHz, min. -93 dBm
  • 802.11n/40 MHz, min. up to -88 dBm
5 GHz :
  • 802.11a, min. up to -95 dBm
  • 802.11ac/n/20 MHz, min. -94 dBm
  • 802.11ac/n/40 MHz, min. -92 dBm)
  • 802.11ac/80 MHz, min. -89 dBm)
Number of 10/100/1000M LAN 1
PoE Yes
PoE power draw 9 W
WLAN Security
WPA/WPA2-Enterprise Yes
WMM WiFi compliant
IEEE 802.1X Yes
Number of multiple SSID 16
MAC filtering Yes
L2 Isolation Yes, multiple profile
RADIUS authentication Yes
IPv6 support Yes
DHCP client Yes
Zyxel One Network
ZON Utility
  • Discovery of Zyxel switches, APs and gateways
  • Centralized and batch configurations
    • IP configuration
    • IP renew
    • Device reboot
    • Device locating
    • Web GUI access
    • Firmware upgrade
    • Password configuration
    • One-click quick association with Zyxel AP Configurator (ZAC)
Zyxel AP Configurator*2
  • Batch AP configuration
  • Batch AP firmware upgrade
  • Batch AP profile backup
Standalone AP mode Yes
Plenum rating Yes
Power supply Input: AC 100 - 240 V - 50/60 Hz 0.3 A; Output: DC +12 V 1 A
MTBF (hr) 1,241,824
Standard Compliance
  • IEEE 802.3
  • IEEE 802.3u
  • IEEE 802.11ac
  • IEEE 802.3az
  • IEEE 802.3af
  • 802.11b: DBPSK, DQPSK, CCK
  • 802.11g: BPSK, QPSK, 16-QAM, 64-QAM
  • 802.11a: BPSK, QPSK, 16-QAM, 64-QAM
  • 802.11n: BPSK, QPSK, 16-QAM, 64-QAM
  • 802.11ac: BPSK, QPSK, 64-QAM, 256-QAM
  • FCC Part 15C
  • FCC Part 15E
  • ETSI EN 300 328
  • EN 301 893
  • LP0002
  • EN 60601-1-2
  • FCC Part 15B
  • EN 301 489-1
  • EN 301 489-17
  • EN55032
  • EN55024
  • EN61000-3-2/-3
  • BSMI CNS13438
  • EN 60950-1
  • IEC 60950-1
  • BSMI CNS14336-1
Physical Specifications and others
Item Dimensions (WxDxH)(mm/in.)
130 x 130 x 54.7/5.12 x 5.12 x 2.17
Weight (kg/lb.)
Packing Dimensions (WxDxH)(mm/in.)
278 x 209 x 72/10.94 x 8.23 x 2.83 
Weight (kg/lb.)
Included accessories
  • Power adapter
  • Wall/Ceiling-mount plate
Environmental Specifications
Operating Temperature
0°C to 50°C/32°F to 122°F
10% to 90% (non-condensing)
Storage Temperature
-30°C to 70°C/-22°F to 158°F
10% to 90%

*1: Maximum output power is limited by regional regulatory. 
*2: Support from ZAC Utility V1.1.3 or above; support only in standalone mode.